Quickstart

This walks through the whole setup once, with the defaults. Every step has its own guide if you want the details.

Before you start

• A MikroTik router with internet access and a PPPoE server or hotspot you want to use.
• Terminal access to that router (Winbox → New Terminal, WebFig, or SSH).
• RouterOS 7 if you can. RouterOS 6 works, but the tunnel is slower and the NAS costs more.

Steps

1. 1
   Create an account and claim your welcome credit

   Sign up, then open Billing and claim the welcome credit (1.000.000 credits, valid for 30 days). Claim it when you are ready to set up, since the 30 days start then.

2. 2
   Create a workspace

   On Workspaces, create one and give it a name. Check the time zone in the workspace Settings: expiry dates and monthly renewals are counted in it.

3. 3
   Add your router as a NAS

   In the workspace, open NAS → add a NAS, pick WireGuard for RouterOS 7, and copy the install command. Paste it into the router's terminal. The NAS turns online within a minute. Details: Connect a router.

4. 4
   Create a plan

   Open Plans and create one, for example "Home 20 Mbps" with 20 Mbps down and 5 Mbps up. Leave the limits unlimited for now. Details: Plans.

5. 5
   Add a subscriber

   Open Subscribers and add one with a username, a password and your new plan. Choose the login type that matches your router: PPPoE, Hotspot or both.

6. 6
   Log in

   Connect a client to your PPPoE server or hotspot with that username and password.

Check it works

The login appears under Live Sessions within a few seconds, and the subscriber shows as online. If it does not, see Troubleshooting: the most common causes are a typo in the password, a login type that does not match, or the NAS not being online yet.